Follow along as Mike and Hannah walk through how to install the Delta® Classic 500 36x36 Shower Wall Set. This video will also work for the Delta® Classic 500 32x32 and 48x34 shower wall sets. See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Drill
- Safety Glasses
- Caulk Gun
- Adhesive
-Two Tubes of Sealant
- Tape Measure
- Staple Gun
- Sill Plate Gasket
- Level
- Carpenters Square
- Shims
- Drop Cloth
- Pencil
- Utility Knife
- 3/16” Drill Bit
- Bit Holder Extension
- Driver Bit
- 1 ¼" Stainless or Zinc Plated Truss Head Screws
- Hole Saw
- 2 ½” Construction Screws
- Lumber
Steps:
0:00 Intro
2:50 Check for Plumb, Square, & Level
3:51 Install Blocking
5:35 Install Door Nailers
7:19 Dry Fit Panels
9:24 Drill Pilot Holes
14:24 Install Foam Tape
16:38 Install Fire Retardant Pad
17:51 Install Back Panel
20:42 Install Side Panels
Check out these related videos:
How to Install the Delta® Classic 500 Shower Base (36x36) - https://youtu.be/U4b3FtZ8Igg
How to Install Shims - https://youtu.be/awWb1HOXlAY