Follow along as Mike and Hannah walk through how to install the Delta® EverEdge 48x34 Shower Wall Set. See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Drill
- Safety Glasses
- Caulk Gun
- Adhesive
-Two Tubes of Sealant
- Tape Measure
- Staple Gun
- Sill Plate Gasket
- Level
- Carpenters Square
- Shims
- Drop Cloth
- Pencil
- Utility Knife
- 3/16” Drill Bit
- Bit Holder Extension
- Driver Bit
- 1 ¼" Stainless or Zinc Plated Truss Head Screws
- Hole Saw
- 2 ½” Construction Screws
- Lumber
Steps:
0:00 Intro
2:43 Check for Plumb, Square, & Level
3:44 Install Blocking
5:28 Install Door Nailers
7:13 Dry Fit Panels
9:10 Drill Pilot Holes
14:10 Install Foam Tape
16:24 Install Fire Retardant Pad
17:37 Install Back Panel
20:28 Install Side Panels
Check out these related videos:
How to Install Shims - https://youtu.be/awWb1HOXlAY
How to Install the Delta® EverEdge Shower Base (48x34) - https://youtu.be/z-yQviu0oVg