Follow along as Mike and Hannah walk through how to install the Delta® EverEdge 60x32 Shower Wall Set. See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Drill
- Safety Glasses
- Caulk Gun
- Adhesive
-Two Tubes of Sealant
- Tape Measure
- Staple Gun
- Sill Plate Gasket
- Level
- Carpenters Square
- Shims
- Drop Cloth
- Pencil
- Utility Knife
- 3/16” Drill Bit
- Bit Holder Extension
- Driver Bit
- 1 ¼" Stainless or Zinc Plated Truss Head Screws
- Hole Saw
- 2 ½” Construction Screws
- Lumber
Steps:
0:00 Intro
2:43 Check for Plumb, Square & Level
3:51 Install Blocking
5:14 Install Door Nailers
7:39 Dry Fit Panels
9:50 Drill Pilot Holes
15:50 Install Fire Retardant Pad
17:23 Install Foam Tape
20:45 Install Back Panel
23:35 Install Side Panels
Check out these related videos:
How to Install Shims - https://youtu.be/awWb1HOXlAY
How to Install the Delta® EverEdge Shower Base (60x32) - https://youtu.be/YSeGSa5yOR8